Fork Stop Pins lower trees may be drilled and tapped to accept the stop pins. 1-7/8” Long, not including threaded portion
Fits:
Replacement application for triple tree set

Fork Stop Pins lower trees may be drilled and tapped to accept the stop pins. .Stop pin set for triple tree sets with 3, 4, 5 or 6° rakes.
Fits:
Replacement application for triple tree set.

Chrome universal fork stop mounts to triple tree

The240749 stop has a height of 1-3/16". The center to center bolt holes measure 3". Drilling of triple tree may be required. Fork stop kit is to adapt billet trees to FXD models.

The 241208 Fork stop kit is to adapt billet tress to Big Twin models. Kit mount holes measure 2-15/16" center to center.

Stainless steel fork stop mounts to 39mm triple trees under lower bearing. The fork stops prevent your forks from damaging the gas tank. When installing on lower triple trees, install under steering head bearing. Drill 4 holes in the triple tree using the steering stop as a jig and secure the steer stop with the 4 provided pins. FXD 1991-up

Stainless Steel fork stop mount to custom triple trees under lower bearing. These fork stops prevent your forks from damaging the gas tank. When installing on the lower triple tree, under the steering head bearing, drill 4 holes in the triple tree using the steer stop as a jig and secure the steer stop with the 4 provided pins. BT 1948-99

Internal fork stop neck cup kit includes pieces for entire installation on Big Twins and custom frames which accept press in neck cups.
Kit allows choice of turning radius of 35° or 45°. Order bearings, races and cups separately.
Fits:
FXR 1982-1994

Chrome internal fork stop kit includes pieces for entire installation on Big twins and custom frames which accept press in neck cups.
Kit allows turning of 45°. Order bearings, races and cups separately.
Fits:
FXST 1988-UP
FXD 1991-UP

Chrome Internal Fork Stop Kit includes pieces for complete installation on Big Twins, and custom frames which accept press in neck cups. Kit allows choice of turning radius of 35 or 45 degrees. Instructions included.
Fits:
FLH 1949-1984
FX 1971-1984
FXST 1984-1987