HOME

Ordering and shipping details


RIGID FRAME BT Pre-84

Email for availability , LOCAL PICK-UP ONLY NO SHIPPING

info@phantomkustom.com

Custom Rigid Frame with Bobbed Mounts

512160
Big Twin custom rigid straight leg style frame comes with bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate a Panhead or Shovelhead engine, 4-speed transmission, and 1936-1983 bobbed tanks. This frame is disc brake type and uses rear belt drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512160, $779.99

 
 

Custom Rigid Frame

512167
Big Twin custom rigid straight leg style frame without bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate an Evolution engine, 5-speed transmission, and flat side bobbed gas tanks. This frame is disc brake type and uses rear belt drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512167, $829.99

 
 

Big Twin Custom Rigid Frame

512159
Big Twin custom rigid straight leg style frame without bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate an Evolution engine, 4-speed transmission, and flat side fuel tank. This frame is disc brake type and uses rear chain drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512159, $1055.99

 
 

Big Twin Custom Rigid Frame

512158
Big Twin custom rigid straight leg style frame without bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate a Panhead or Shovelhead engine, 4-speed transmission, and 1936-1983 bobbed tanks. This frame is juice disc brake type and uses rear chain drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512158, $1089.99

 
 

Custom Rigid Frame with Bobbed Mounts

512164
Big Twin custom rigid straight leg style frame comes with bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate a Panhead or Shovelhead engine, 5-speed transmission, and 1936-1983 bobbed tanks. This frame is disc brake type and uses rear belt drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512164, $1094.99

 
 

Custom Rigid Frame with Bobbed Mounts

512166
Big Twin custom rigid straight leg style frame comes with bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate an Evolution engine, 5-speed transmission, and flat side fuel tank. This frame is disc brake type and uses rear belt drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512166, $1094.99

 
 

Big Twin Custom Rigid Frame

512156
Big Twin custom rigid straight leg style frame comes with bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate a Panhead or Shovelhead engine, 4-speed transmission, and 1936-1983 bobbed tanks. This frame is juice disc brake type and uses rear chain drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512156, $1149.99

 
 

Big Twin Custom Rigid Frame

512157
Big Twin custom rigid straight leg style frame comes with bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame is equipped with a tab located at the rear right side of the frame. Accommodates an Evolution engine, 4-speed transmission, and flat side fuel tank. This frame is disc brake type and uses rear chain drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512157, $1149.99

 
 

Custom Rigid Frame

512165
Big Twin custom rigid straight leg style frame without bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate a Panhead or Shovelhead engine, 5-speed transmission, and 1936-1983 bobbed tanks. This frame is disc brake type and uses rear belt drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512165, $1054.99

 
 

Custom Rigid Frame with Bobbed Mounts

512161
Big Twin custom rigid straight leg style frame comes with bobbbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate an Evolution engine, 4-speed transmission and flat side fuel tank. This frame is disc brake type and uses rear belt drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512161, $1054.99

 
 

Custom Rigid Frame

512162
Big Twin custom rigid straight leg style frame without bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate a Panhead or Shovelhead engine, 4-speed transmission, and 1936-1983 bobbed tanks. This frame is disc brake type and uses rear belt drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512162, $1054.99

 
 

Custom Rigid Frame

512163
Big Twin custom rigid straight leg style frame without bobbed mounts. Features 2-1/4" stretch in front down tubes and a 35° rake.
Stock type neck accepts wide glide triple trees. Frame will accommodate an Evolution engine, 4-speed transmission, and flat side fuel tank. This frame is disc brake type and uses rear belt drive. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512163, $1054.99

 
 

No Pic

Replica Retro Rigid Frame 30° Rake

511243
Replica retro rigid frame straight leg style features galvanized originial type construction including forged parts in neck, side car mounts, and rear axle area.
This retro rigid frame can be fitted with a Panhead, Shovelhead, Evolution, Knucklehead or TC-88 engine with a 4-speed or 5-speed transmission. Frame has a 30° rake, +2" raised neck, and will accept a 230 rear tire with chain drive or 200 rear tire with belt drive. Tin inner primary must be utilized for this application. Order related parts separately. Manufacturer's Statement of Origin is supplied for the frame. Frame is an exact Replica of the original style only it is updated to accept flat side tanks, all Big Twin engines, and rear tires 200-240 series with chain or belt, 4 or 5 speed transmission giving you many options.
Fits:
Custom application

Item# 511243, $1174.99

Suggested to use #170859 transmission mount plate
Suggested to use with #420617 tin inner primary
Use a 1/2" offset transmission mount plate and 1/2" offset motor sprocket with spline, this will offer clearance to use a 200 rear tire with a chain rear drive.
If using with a TC-88 engine order #510625 rear frame mount adapter plate
Suggested to use #190570 flange spacer
Suggested to use with #190575 sprocket and nut set
Use # 310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.

510527 - Rear Frame Engine Mount and Front Transmission Mount
510526 - Front Engine Mount Frame Brace
510533 - Top Seat Brace Frame Casting
511720 - Frame 5th Mount Tab

 

No Pic

Replica Wishbone Rigid Frame

511244
This galvanized Replica frame will hold a Panhead or Shovelhead engine with a 4-speed transmission.
The Wishbone frame has a 30° rake, +2" raised neck and accepts a 200mm rear tire. This rigid frame is made with forgings and has the look you want. Forgings make the frame much stronger than tubes. This frame will accept rear axle rigid style, 3/4" axle plate collars, stock style plunger seat post, transmission mount plate, inner primary cover flange spacers and extended sprocket shaft and nut set which must be ordered separately. Frame will accept an Evolution engine with a 5-speed transmissionwhen ordering a rear engine mount adapter, separatel y. Manufacturer's Statement of Origin is supplied for the frame. Frame is an exact Replica of the original style only it is updated to accept flat side tanks, all Big Twin engines, and rear tires 200-240 series with chain or belt, 4 or 5 speed transmission giving you many options.
Fits:
Custom application

Item# 511244, $1174.99

Suggested to use #441942 axle
Suggested to use with #441946 axle plate collar
Suggested to use with #170859 transmission plate
Suggested to use with #190570 inner primary cover flange spacers
Suggested to use with #190575 sprocket shaft and nut set
Suggested to use with #510625 rear engine frame mount adapter for Evolution engine with a 5-speed transmission.
Use # 310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.
 

Replica Straight Leg Rigid Frame

512155
Replica straight leg rigid frame features stock neck for Wide Glide triple trees and bobbed mounts.
Will accept Evolution motor which will accept flatside fuel tank, 5-speed transmission, uses rear belt drive, and is disc brake type. Frame can only be used with FXST transmission mount and FXST style oil tank. This frame has no stretch or rake and does not accept a seat post. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512155, $1244.99

Required to use #40-0394 or #40-0396 oil tanks.
 

Replica Wishbone Rigid Frame

512154
Replica Wishbone rigid frame features stock neck for Wide Glide triple trees and bobbed mounts.
Will accept Evolution motor which accepts flatside fuel tanks, 5-speed transmission, and rear belt drive. Frame has no stretch or rake and does not accept a seat post. Frame is disc brake type and can only be used with FXST transmission mount and FXST style oil tank. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512154, $1244.99

Suggested to use with #40-0394 oil tank
Suggested to use with #40-0396 oil tank.
 

Replica Wishbone Rigid Frame

512151
Replica Wishbone rigid frame features stock neck for Wide Glide triple trees and bobbed mounts.
Will accept Evolution motor which accepts flatside fuel tanks, 4-speed transmission, and rear chain drive. Frame is disc brake type, and has no stretch or rake. Does not accept a seat post. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512151, $1254.99

 
 

Replica Wishbone Rigid Frame

511948
This Replica frame will hold a Panhead or Shovelhead engine with a 4-speed transmission.
The Wishbone frame has a 30° rake, +2" raised neck and accepts a 200mm rear tire. This rigid frame is made with forgings and has the look you want. Forgings make the frame much stronger than tubes. This frame will accept rear axle rigid style, 3/4" axle plate collars, stock style plunger seat post, transmission mount plate, inner primary cover flange spacers and extended sprocket shaft and nut set which must be ordered separately. Frame will accept an Evolution engine with a 5-speed transmission when ordering a rear engine mount adapter, separately. A Manufacturer's Statement of Origin is available upon request. Frame is an exact Replica of the original style only it is updated to accept flat side tanks, all Big Twin engines, and rear tires 200-240 series with chain or belt, 4 or 5 speed transmission giving you many options.
Fits:
Custom application

Item# 511948, $1274.99

Suggested to use #441942 axle
Suggested to use with #441946 axle plate collar
Suggested to use with #170859 transmission plate
Suggested to use with #190570 inner primary cover flange spacers
Suggested to use with #190575 sprocket shaft and nut set
Suggested to use with #510625 rear engine frame mount adapter for TC-88 engine with a 5-speed transmission.
In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.
Frame accepts a 230 tire with a chain
Use #310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead Engines in 1948-up frames.

510585 - Sidecar Frame Loop Set
510533 - Top Seat Brace Frame Casting
101288 - Bronze Seat Post Bushings
310528 - Replica Tool Box Mounting Bracket

 

Replica Retro Rigid Frame 30° Rake

511957
Replica retro rigid frame straight leg style features original type construction including forged parts in neck, side car mounts, and rear axle area.
This retro rigid frame can be fitted with a Panhead, Shovelhead, Evolution, Knucklehead or TC-88 engine with a 4-speed or 5-speed transmission. Frame has a 30° rake, +2" raised neck, and will accept a 230 rear tire with chain drive or 200 rear tire with belt drive. Tin inner primary must be utilized for this application. This frame is an exact Replica of the originial style, only it is updated to accept flat side tanks, all Big Twin engines, and rear tires 200-240 series with chain or belt, 4 or5 speed transmissions, giving you many options. Order related parts separately. A Manufacturer's Statement of Origin is available upon request.
Fits:
Custom application

Item# 511957, $1294.99

Suggested to use #170859 transmission mount plate
Suggested to use with #420617 tin inner primary
Use a 1/2" offset transmission mount plate and 1/2" offset motor sprocket with spline, this will offer clearance to use a 200 rear tire with a chain rear drive.
If using with a TC-88 engine order #510625 rear frame mount adapter plate
Suggested to use #190570 flange spacer
Suggested to use with #190575 sprocket and nut set
In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.
Use # 310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.

510527 - Rear Frame Engine Mount and Front Transmission Mount
510526 - Front Engine Mount Frame Brace
510533 - Top Seat Brace Frame Casting
511720 - Frame 5th Mount Tab

 

Replica Wishbone Frame

511954
Replica Wishbone frame is an authentic reproduction of a 1954 Panhead frame, but will also fit 1948-57 Rigid.
Original forged parts are the neck, front and rear engine mounts, side car mounts, top seat post yoke, footboard tabs, and rear axle plates. Neck will accept a key lock. Mechanical brake cross shaft bushings, tool box mount, and grease fittings are installed. Frame has cable mount tab under gas tank on the cross bar. Frame will house a Panhead or Shovelhead engine, and a 4-speed transmission. It will also allow installation of a Knucklehead or Flathead engine with the use of a front 3/8" engine mount spacer. Seat post bushing and the mechanical brake cross tube bushing may require reaming prior to assembly. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
FL 1948-1987

Item# 511954, $1594.99

In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.
Use # 310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.

510522 - Rear Frame Engine Mount and Front Transmission Mount
510584 - Frame Top Engine Mount
510542 - Lower Inner Frame Primary Tab
510592 - Front Cable Frame Bracket

 

Replica Rigid Frame

511955
Replica straigt leg rigid frame with cross tube is for chain drive models.
This frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30° neck rake. Details include forged parts as original neck, front and rear engine mount, side car mounts, top seat yoke, and footboard tabs. This mechanical frame will accept neck lock, cross shaft, and seat post. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Cross shaft may be removed for use with hydraulic or disc brakes. Disc or drum brake tabs are available separately. Seat post bushing and mechanical brake cross tube bushing may require reaming prior to assembly. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
Custom application
FL 1954-1957

Item# 511955, $1594.99

In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.
Use #310475 Front Engine Mount Spacer to accept 1936-1947 Kucklehead or Flathead engines in 1948 - up frames.

510522 - Rear Frame Engine Mount and Front Transmission Mount
510526 - Front Engine Mount Frame Brace
510575 - Cable Mount Frame Tab
101288 - Bronze Seat Post Bushings

 

Paughco Straight Leg Rigid Frame

512152
Paughco straight leg rigid frame features stock neck for Wide Glide triple trees and bobbed mounts.
Will accommodate Panhead or Shovelhead engine, chain drive, 4-speed transmission, and is disc brake type. A front engine mount spacer will allow installation of a Knucklehead or Flathead engine. This frame has no stretch or rake and does not accept a seat post. A Manufacturer's Statement of Origin is available upon request.
Fits:
Custom application for chain drive

Item# 512152, $1614.99

Use #310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.
 

Replica Straight Leg Rigid Frame

512153
Replica straight leg rigid frame features stock neck for Wide Glide triple trees and bobbed mounts.
Will accept Evolution motor which will accept flatside fuel tank, 4-speed transmission, utilizes chain drive, and is disc brake type. Frame has no stretch or rake and does not accept a seat post. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512153, $1614.99

 
 

Replica Straight Leg Rigid Frame

512179
Replica straight leg rigid frame features stock neck for Wide Glide triple trees and bobbed mounts.
Frame has no stretch or rake and does not accept a seat post. Will accommodate Panhead or Shovelhead engine, chain drive, 4-speed transmission, and is mechanical brake type. A front engine mount spacer will allow installation of a Knucklehead or Flathead engine. A Manufacturer's Statement of Origin is available upon request.
Fits:
Custom application for chain drive

Item# 512179, $1634.99

Use # 310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.

 

Replica Wishbone Rigid Frame

511015
Replica 1953-1954 Big Twin Wishbone rigid frame is an authentic reproduction with a 30° rake.
Frame details include forged parts as original including neck, front and rear engine mounts, side car loops, top seat post yoke, footboard tabs, and rear axle plates. Frame also has a horn bracket and cable mount tab attached to wishbone. Exact blanked and formed stampings are utilized in their respective places with the correct tool box mount. Neck will accept key lock. Mechanical brake cross shaft tube with grease fittings and bushings are installed. Will house Panhead or Shovelhead engine and a 4-speed transmission. Will also allow installation of a Knucklehead or Flathead engine with use of a front engine mount spacer. Seat post bushing and the mechanical brake cross tube bushing may require reaming prior to assembly. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
FL 1948-1965

Item# 511015, $1654.99

In some instances it may be necessary to ream of rile holes slightly in order to assemble parts onto the frame.
Use # 310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.

510522 - Rear Frame Engine Mount and Front Transmission Mount
510526 - Front Engine Mount Frame Brace
510542 - Lower Inner Frame Primary Tab
101288 - Bronze Seat Post Bushings

 

Replica Wishbone Rigid Frame

512178
Replica Wishbone rigid frame features stock neck for Wide Glide triple trees and bobbed mounts.
Frame has no stretch or rake and does not accept a seat post. Accepts Panhead or Shovelhead engine, 4-speed transmission, is mechanical brake type, and is for chain drive models. A front engine mount spacer will allow instalation of a Knucklehead or Flathead engine. A Manufacturer's Statement of Origin is available upon request.
Fits:
Custom application for chain drive

Item# 512178, $1664.99

Use # 31-0475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.

 

Replica Wishbone Rigid Frame

512150
Replica Wishbone rigid frame features stock neck for Wide Glide triple trees and bobbed mounts.
Will accept Panhead or Shovelhead engine, 4-speed transmission, and is disc brake type. A front engine mount spacer will allow installation of a Knucklehead or Flathead engine. This frame has no stretch or rake. Frame is for chain drive models and does not accept a seat post. A Manufacturer's Statement of Origin is available upon request.
Fits:
Custom application for chain drive

Measurements
Length: 56" Width: 14" Height: 31"

Item# 512150, $1664.99

Use 310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead Engines in 1948-up frames.
 

Replica Wishbone Rigid Frame

511007
Replica Wishbone rigid frame is an authentic reproduction of a 1948 Big Twin rigid frame with a 30° rake.
Frame details include forged parts as original including neck, front and rear engine mounts, side car loops, top seat post yoke, footboard tabs, and rear axle plates. Exact blanked and formed stampings are utilized in their respective places with the correct tool box mount. Neck will accept key lock. Mechanical brake cross shaft tube with grease fittings and bushings are installed. Will house Panhead or Shovelhead engine and a 4-speed transmission. Will also allow installation of a Knucklehead or Flathead engine with use of a front engine mount spacer. Seat post bushing and the mechanical brake cross tupe bushing may require reaming prior to assembly. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
FL 1948-1948

Item# 511007, $1684.99

In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frames.
Use #310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.

510522 - Rear Frame Engine Mount and Front Transmission Mount
510526 - Front Engine Mount Frame Brace
270664 - Footboard Tabs
510534 - Crossover Shaft Frame Brace
101288 - Bronze Seat Post Bushings

 

Replica Wishbone Frame

511008
OEM No: 47003-49
Replica Wishbone frame is an authentic reproduction of a 1949-52 Big Twin rigid frame with a 30° rake.
Frame details include forged parts as original including neck, front and rear engine mounts, side car loops, top seat post yoke, footboard tabs, and rear axle plates. Exact blanked and formed stampings are utilized in their respective places with the correct tool box mount. Neck will accept key lock. Mechanical brake cross shaft tube with grease fittings and bushings are installed. Will house Panhead or Shovelhead engine and a 4-speed transmission. Will also allow installation of a Knucklehead or Flathead engine with use of a front engine mount spacer. Seat post bushing and the mechanical brake cross tube bushing may require reaming prior to assembly. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
FL 1949-1952

Item# 511008, $1684.99

In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.
Use #310475 Front Engine Mount Spacer to accept 1936-1947 Knucklehead or Flathead engines in 1948-up frames.

510522 - Rear Frame Engine Mount and Front Transmission Mount
510532 - Coil Mount Frame Block Set
270664 - Footboard Tabs
101288 - Bronze Seat Post Bushings

 

No Pic

Tall Chopper Rigid Frame

512184
Tall chopper rigid frame features 4" stretch in backbone, 8" stretch in down tubes, and a 45° rake. Frame houses Panhead or Shovelhead engine.
Accepts Softail oil tank, 6° billet trees with internal fork stops, and should be used with 16" overstock fork tube assembly. Frame is disc brake and chain drive type, will house a 4-speed transmission, and accepts a 140 rear tire. Manufacturer's Statement of Origin is supplied for the frame.
Fits:
Custom application

Item# 512184, $1689.99

 
 

No Pic

Replica Rigid Frame

511956
Replica straight leg rigid frame with cross tube is for chain drive models.
This frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30° neck rake. Details include forged parts as original neck, front and rear engine mount, side car mounts, top seat yoke, axle, seat post and footboard tabs. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Cross shaft may be removed for use with hydraulic or disc brakes. Disc or drum brake tabs are available separately. Seat post bushing and mechanical brake cross tube bushing may require reaming prior to assembly. The frame has an indent on the left lower rear frame bar for tooling fixture. Manufacturer's Statemnt of Origin is supplied.
Fits:
Custom application
FL 1954-1957

Item# 511956, $1699.99

 
 

No Pic

Replica Wishbone Frame Kit

511200
Replica Wishbone frame is an authentic reproduction of a 1949-52 Big Twin rigid frame with a 30° rake. Includes seat post, transmission plate, and axle kit.
Frame details include forged parts as original including neck, front and rear engine mounts, side car loops, top seat post yoke, footboard tabs, and rear axle plates. Exact blanked and formed stampings are utilized in their respective places with the correct tool box mount. Neck will accept key lock. Mechanical brake cross shaft tube with grease fittings and bushings are installed. Will house Panhead or Shovelhead engine and a 4-speed transmission. Will also allow installation of a Knucklehead or Flathead engine with use of a front engine mount spacer. Seat post bushing and the mechanical brake cross tube bushing may require reaming prior to assembly. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
FL 1949-1952

Item# 511200, $1734.99

510522 - Rear Frame Engine Mount and Front Transmission Mount
510532 - Coil Mount Frame Block Set
270664 - Footboard Tabs
101288 - Bronze Seat Post Bushings
 

No Pic

Replica Knucklehead 29° Rake Rigid Frame

511941
OEM No: 47003-41
Knucklehead rigid frame is an authentic reproduction of the factory style frame.
Rear fender crossbar is supported by exactly duplicated "saddles" brazed at each end. The 29° neck angle will acceept inline spring forks. Parkerized seat post assembly, and transmission mount included, rear axle kit installed. Frame requires purchase of clamp on coil bracket kit. Manufacturer's Statment of Origin is supplied.
Fits:
FL 1941-1946 From 1941 to early 1946
EL 1941-1946 From 1941 to early 1946
U 1941-1946 From 1941 to early 1946

Item# 511941, $1764.99

 
 

No Pic

Replica Knucklehead 30° Rake Frame

511947
Knucklehead frame is an authentic reproduction of the factory style bull neck frame.
Forged parts includes transmission mount, seat post assembly and rear axle kit installed. The 30° neck angle will accept offset spring forks. Seat post and mechanical brake cross shaft bushings, correct tool boxmount, and grease fittings are installed. Manufacturer's Statement of Origin is supplied.
Fits:
FL 1946-1947 From late 1946 to early 1947
U 1946-1947 From late 1946 to early 1947
EL 1946-1947 From late 1946 to early 1947

Item# 511947, $1764.99

In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.

510528 - Rear Frame Axle Plate Set
510534 - Crossover Shaft Frame Brace
101288 - Bronze Seat Post Bushings
510572 - Battery Frame Tab 6 Volt

 

Replica Knucklehead 29° Rake Rigid Frame

511009
OEM No: 47003-41
Knucklehead rigid frame is an authentic reproduction of the factory style frame.
Rear fender crossbar is supported by exactly duplicated "saddles" brazed at each end. The 29° neck angle will accept inline spring forks. Seat post and mechanical brake cross shaft bushings, tool box mount, and grease fittings are installed. Frame will house Knucklehead or Big Twin Flathead engine and 3 or 4-speed transmission. Frame requires purchase of clamp on coil bracket kit. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
FL 1941-1946 From 1941 to early 1946
EL 1941-1946 From 1941 to early 1946
U 1941-1946 From 1941 to early 1946

Item# 511009, $2184.99

In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.

510528 - Rear Frame Axle Plate Set
510534 - Crossover Shaft Frame Brace
101288 - Bronze Seat Post Bushings
510572 - Battery Frame Tab 6 Volt

 

Replica Knucklehead 30° Rake Frame

511020
Knucklehead frame is an authentic reproduction of the factory style bull neck frame.
Forged parts include neck, front and rear engine mounts, side car loops, top seat yoke, footboard tabs, and rear axle plates. The 30° neck angle will accept offset spring forks. Seat post and mechanical brake cross shaft bushings, correct tool box mount, and grease fittings are installed. Frame will accommodate Knucklehead or Big Twin Flathead engine and 3 or 4-speed transmission. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
FL 1946-1947 From late 1946 to early 1947
U 1946-1947 From late 1946 to early 1947
EL 1946-1947 From late 1946 to early 1947

Item# 511020, $2299.99

In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.

510528 - Rear Frame Axle Plate Set
270664 - Footboard Tabs
510529 - Front Oil Tank Mount Frame Casting
510531 - Inner Primary Cover Frame Tab

 

Replica Knucklehead Frame 28° Rake

511039
Replica Knucklehead frame is an authentic reproduction of the factory style frame.
Forged parts including neck, front and rear engine mounts, side car loops, top seat yoke, footboard tabs, and rear axle plates are exactly where they should be. The 28° neck angle will accept inline spring forks. Seat post and mechanical brake cross shaft bushings, correct tool box mount, and grease fittings are installed. Frame will house a Knucklehead or Flathead engine and a 3 or 4-speed transmission. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
EL 1937-1937

Item# 511039, $3345.99

 
 

Replica Knucklehead Frame 28° Rake

511041
Replica Knucklehead frame is an authentic reproduction of the factory style frame.
Forged parts including neck, front and rear engine mounts, side car loops, top seat yoke, footboard tabs, and rear axle plates are exactly where they should be. The 28° neck angle will accept inline spring forks. Mechanical brake cross shaft bushings, correct tool box mount, and grease fittings are installed. Frame will accommodate Knucklehead or Big Twin Flathead engine and 3 or 4-speed transmission. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
EL 1938-1940

Item# 511041, $3345.99

Knucklehead frame requires purchase of clamp on coil bracket kit #490099.
In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.

510522 - Rear Frame Engine Mount and Front Transmission Mount
270664 - Footboard Tabs
510534 - Crossover Shaft Frame Brace

 

1936 Replica Knucklehead Frame

511040
Replica Knucklehead frame is an authentic reproduction of the factory style frame with 28° Rake. 1936 only style features 1" down tubes with weld on style side car mounts, particular to 1936 only!
Forged parts including neck, front and rear engine mounts, side car loops, top seat yoke, footboard tabs, and rear axle plates are exactly where they should be. The 28° neck angle will accept inline spring forks. Mechanical brake cross shaft bushings, correct tool box mount, and grease fittings are installed. Frame will accommodate Knucklehead or Big Twin Flathead engine and 3 or 4-speed transmission. In lieu of a serial number, a Manufacturer's Statement of Origin is available upon request.
Fits:
EL 1936-1936

Item# 511040, $3499.99

Knucklehead frame requires purchase of clamp on coil bracket kit #49-0099.
In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame.

510522 - Rear Frame Engine Mount and Front Transmission Mount
270664 - Footboard Tabs
101288 - Bronze Seat Post Bushings
510510 - Lower Frame Fender Bracket

 

 

C

1

Item# 1, $1.99 each +$3 S&H

 
 

 

Questions? info@phantomkustom.com , please be sure to include the item# in all emails!

 

a

PHANTOM KUSTOM .com

On-line Parts Center for Custom Harley Choppers and Bobbers

Mail to:: Phantom Kustom :: PO BOX 260 :: Marlboro, NY 12542

Email :: info@phantomkustom.com

HardNox Web Design